Concrete Grinding & Honing Contractors — Gold Coast & Brisbane

“ICGC handled the tile removal and grinding in one visit. Our tiler arrived to a perfectly clean slab — saved us days on the renovation timeline. Highly recommend.”

“We use ICGC for all our prep grinds before epoxy. They understand what CSP the coating system needs and the surface is always ready when our installers arrive. No surprises.”

“Had my garage floor ground and sealed. They explained the process before starting, ran dust extraction the whole time, and the result is exactly what I wanted. Would use again.”

“Needed 800m² of warehouse floor prepped for a new epoxy system. ICGC worked around our operating schedule, matched the spec the coater needed, and the coating has gone down perfectly. Zero issues.”

“I send all my tile removal jobs to ICGC. The adhesive cleanup is the best I’ve seen — my tiles go down flat, bond properly, and I don’t get callbacks. That’s all that matters.”

“Three bathrooms retiled in a heritage Queenslander. ICGC removed all the old tiles and adhesive without damaging the slab, ran extraction the whole time. Dust-free as promised. Professional crew.”

Quote

Send photos or a description. We quote same day — clear scope, no guesswork.

Strip & Remove

Tiles, carpet, vinyl — pulled up and cleared. Adhesive included. Dust extraction running.

Adhesive Cleanup

Residue ground back with diamond tooling until the slab is genuinely clean.

Grind & Level

Planetary grinders, progressive diamonds. Flat, profiled, to your spec.

Finish & Seal

Densifiers, sealants, or polish applied. Surface hardened for SEQ conditions.

Clean Handover

Debris gone, site clean. Your next trade walks onto a ready surface.

Concrete floor grinding uses diamond-tipped machinery to flatten, clean, and profile a concrete slab. It's used to level uneven surfaces, remove coatings and adhesive, and prepare concrete for polishing, epoxy, or other floor finishes. We provide concrete floor grinding across the Gold Coast, Brisbane, and Northern Rivers.

Honing produces a smooth, matte-to-satin finish without the high gloss of a full mechanical polish. It's popular for new builds, commercial fitouts, and modern renovations where you want the look of polished concrete without the reflective sheen. We also offer full polished finishes with varying levels of aggregate exposure — from cream polish through to full stone reveal.

Both. We go further than tile-only removal — mechanically removing adhesive residue until the slab is genuinely clean. That's the difference between a surface that's “done” and one that's actually ready for your next finish. Most concrete grinders don't offer this. We do.

Coating failures are almost always caused by poor surface prep. Epoxy applied over laitance, oil, adhesive, or a poorly profiled surface will delaminate — sometimes within weeks. Recoating after failure costs 2–3x the original job. Proper prep is always cheaper.

Standard grinding produces significant silica dust. We use portable industrial vacuum extraction connected directly to our grinding machinery, capturing dust at the source. This keeps the site cleaner, protects everyone's health, and makes us suitable for occupied or partially occupied buildings — including apartments, retail tenancies, and healthcare facilities.

We service the Gold Coast, Brisbane, and Northern Rivers. This covers residential, commercial, and industrial projects across the full corridor from Brisbane CBD to Byron Bay and surrounding areas — including Tweed Heads, Murwillumbah, Lismore, Ballina, and all suburbs in between.